您好,欢迎来到华佗健康网。
搜索
您的当前位置:首页英文说明书POE31008P-at

英文说明书POE31008P-at

来源:华佗健康网
Specifications Network Ports 9 10/100Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX Power Data provided over pairs over 1/2and 3/6 , Pin Assignment Power over over pairs 1/2(+) and 3/6 (-) PoE Distance 3、请不要将交换机放打开交换机机壳。 too. 100m Transmission Method Store-And-Forward Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) Bandwidth:1.6 Gbps Network latency:Less than 20 μs for -byte frames in store-and-forward mode for 100 Mbps to 100 Mbps transmission Performance Buffer memory:96 KB embedded memory per unit Specifications Address database size:1,000 media access control (MAC) addresses per system Addressing:48-bit MAC address Mean Time Between Failure (MTBF):190,000 hours (~ 21 years) Acoustic Noise: 0 dB Network Protocol IEEE 802.3i 10BASET; IEEE 802.3u 100BASETX Standards and IEEE 802.3x Flow Control; IEEE 802.1at DTE Power via MDI IEEE 802.3at Status LEDs System: Power, PoE Maximum Power Per Port: Link, Activity, Speed, PoE Active, PoE Fault Total Power Consumption: 220 W maximum Power Supply IEEE802.3at Power Consumption: 220W maximum (Ports 1 –8) 48VDC, 2.5A power output; plug is localized to country of sale Physical Specifications Dimensions (H x W x D):44x 279x 195mm Weight:1.25kg Environmental Operating temperature: 0 to 55°C Storage temperature: -20 to 75°C Specifications本资料内的所有技术数据若有更改,恕不另行通知。 Operating humidity: 90% maximum relative humidity, non-condensing Operating altitude: 10,000 ft (3,000 m) maximum Electromagnetic CE mark, commercial Emissions FCC Part 15 Class B Safety CE Mark ,commercial CE/LVD EN60950

错误!

9-PORT 10/100 SWITCH WITH 8-PORT POE

Model No.:POE31008 P-at

USER GUIDE

9-PORT 10/100 SWITCH WITH 8-PORT POE The PoE Switch POE31008P-at provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. The nine Fast Ethernet ports can be used for any 10/100 Mbps link and eight of these ports can supply industry-standard IEEE 802.3at power. Advanced auto-sensing algorithm gives power only to IEEE802.3at end devices, so no need to worry about damaging proprietary PoE or non-PoE equipment. In addition, it discontinues the power when PoE devices are disconnected. Easy and reliable, the PoE Switch POE31008P-at automatically determines PoE requirements, speed, duplex, and cable type using Auto Uplink百万高清专用™. POE交换机 The affordably priced PoE Switch POE31008P-at delivers PoE to any small business network that wants to simplify the installation of wireless access WS-104P-AF points and IP-based surveillance cameras. These devices are optimally installed on a ceiling or high on a wall, away from most electrical outlets. PoE eliminates the requirement for a dedicated electrical outlet to power these devices. This allows for flexibility in situating devices where AC power is difficult to access and lowers installation costs. Compact and flexible, the PoE Switch POE31008P-at is ideal for small business networks that need to inexpensively use PoE to deploy wireless access points and IP-based network surveillance cameras. 1、Packing list Content Quantity 1 POE switch 1 2 Power adapter 1 3 Use guide 1 4 Certificate 1 2、Lamp definition Lamp Panel mark Colour State Definition Bright PoE Switch power on Power P Green Black PoE Switch power down Bright Network connection Working LINK Yellow Flash Receiving/sending data Bright POE Output normal POE POE Green Flash POE Output abnormal Black POE No output 3、Hardware connection

1、Please confirm before installation:①The power supply output is in compliance with access equipment power requirements ②POE power supply output line to(1/2\"+\" , 3/6 \"-\" or 4/5\"+\",7/8“-”)whether with access equipment matching ③Whether the matched power adapter output power is the same specification of the switch label。

2、Will be the same for the EIA/TIA568A or 568B standard network cable end access to switch ( 1-4/1- 8, any one ) port, another port access to support POE power supply equipment or other network devices, UPLINK port normally connected to management center or upper convergent switches.

3、the machine matched power adapter output terminal access to switch DC port, the opposite end with AC product word line access to the mains supply socket.

4、check whether the switch power led(P) is on or not, if on , it means the power is connected correctly, switch goes into the normal working state. If the led flashs, please disconnect AC power.

4、Application connection diagram

-at

因篇幅问题不能全部显示,请点此查看更多更全内容

Copyright © 2019- huatuo0.com 版权所有 湘ICP备2023021991号-1

违法及侵权请联系:TEL:199 1889 7713 E-MAIL:2724546146@qq.com

本站由北京市万商天勤律师事务所王兴未律师提供法律服务