路由器间的配置

2）在路由器里配置f0/0、s0/0、时钟、带宽、和开关

s0/0 s0/0

F0/0 F0/0 Serial DCE F0/0 F0/0 IP address:192.168.0.1 IP address:192.168.1.1 Subnet mask:255.255.255.0 Subnet mask:255.255.255.0 Default Gateway:192.168.0.22 Default Gateway:192.168.1.22 对Router0配置：

Continue with configuration dialog? [yes/no]: n---------------------------是不对话？/否 Press RETURN to get started! Router>

Router>en----------------------------------------------------------------------------进入特权模式

Router#configure terminal-------------------------------------------------------进入全局配置模式 Router(config)#int f0/0-----------------------------------------------------------进入f0/0端口

Router(config-if)#ip address 192.168.0.22 255.255.255.0---------------给端口配置IP地址 Router(config-if)#no shutdown-------------------------------------------------启动端口 Router(config-if)#exit--------------------------------------------------------------退出

Router(config)#int s0/0------------------------------------------------------------进入s0/0端口 Router(config-if)#ip address 192.168.2.1 255.255.255.252--------------给端口配置IP地址 Router(config-if)#clock rate 64000----------------------------------------------给端口配置时钟 Router(config-if)#bandwidth 64-------------------------------------------------给端口配置带宽 Router(config-if)#no shutdown--------------------------------------------------启动端口 Router(config-if)#exit

Router(config)#ip route 192.168.1.0 255.255.255.0 192.168.2.2------给端口配置目的网段（pc所在的网段）、目的网段掩码（pc的掩码）和Router1（目的路由器）的IP

对Router1配置：

Continue with configuration dialog? [yes/no]: n Press RETURN to get started! Router> Router>en

Router#configure terminal Router(config)#int f0/0

Router(config-if)#ip address 192.168.1.22 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#int s0/0

Router(config-if)#ip address 192.168.2.2 255.255.255.252 Router(config-if)#clock rate 64000 Router(config-if)#bandwidth 64 Router(config-if)#no shutdown Router(config-if)#exit

Router(config)#ip route 192.168.0.0 255.255.255.0 192.168.2.1